Author Topic: Clutch Arm Bushes source  (Read 144 times)

0 Members and 1 Guest are viewing this topic.

Offline Legacy

  • Newbie
  • *
  • Posts: 23
Clutch Arm Bushes source
« on: 06 May 2019, 19:07 »
Hi

Have a 69 KG Autostick. The clutch arm bushings are pretty worn and I need to replace them.

Would appreciate if anyone can identify a source for the bushings or specs for substitute bushings.

Thanks much
Legacy

Offline volkenstein

  • Moderator
  • Hero Member
  • *****
  • Posts: 1381
Re: Clutch Arm Bushes source
« Reply #1 on: 09 May 2019, 09:36 »
Legacy,
          I'll check my spare bellhousing to see what is in there. These parts are pretty NLA - so you may be fabbing/getting made.
A bearing shop (not an auto parts store) can help if they are sintered bronze. Still will need some fancy machining...

HTH
Volkenstein

'71 RHD A-S Super - "Klaus"

Offline Legacy

  • Newbie
  • *
  • Posts: 23
Re: Clutch Arm Bushes source
« Reply #2 on: 09 May 2019, 23:39 »
Volkenstein

Appreciate you checking your spare bellhousing.  Understand I may have to have them fabricated.  I have a contact that can do that if I can provide the dimensions.

Thanks
Legacy

Offline volkenstein

  • Moderator
  • Hero Member
  • *****
  • Posts: 1381
Re: Clutch Arm Bushes source
« Reply #3 on: 16 May 2019, 05:36 »
Mate,
       Bad news, sorry - those bushes are on the trans itself, which I don't have anymore.
I have EKTA fiche somewhere (that'll take some finding) - so when I find them, hopefully they'll have sizes.

Regards
Volkenstein
'71 RHD A-S Super - "Klaus"