Author Topic: Starting problem  (Read 5868 times)


  • Newbie
  • *
  • Posts: 7
    • Email
Starting problem
« Reply #15 on: March 15, 2007, 01:40:04 PM »
So I've replaced the ignition switch (electrical portion) and now the starter.  Still having the same problem, except now, the car does not start at all!  I bridged the posts from the solenoid to the ignition wire and it started right up... Can I just splice into the wire that comes directly out of the ignition switch and run that back to the starter???



  • Newbie
  • *
  • Posts: 273
    • Email
Easier to do bypass the neutral safety switch.
« Reply #16 on: March 18, 2007, 09:33:35 PM »
          Have a look further down the page. There's a topic which starts "Disable VW neutral etc". You can easily bypass the NS switch and it goes from your Ign to starter anyway, just takes a break at the NS switch.

Check the connections first as they may have fallen off somewhere.

1 Super RHD Semi-Auto "Klaus"