Update 7/13/2020. I have the parts listed below and want to "pay it forward". I would prefer to sell the lot and be local to the Seattle area to avoid shipping. Please send me your offer!!!
(2) Gland Nuts with Washers
Transmission with clutch assembly and all switches, Torque Converter and new pan gasket (no shipping, local pickup only)
Intake Manifold
Flex Plate
Pedal Assembly
Shifter with plate (not pictured)
(2) Clutch Servos / Diaphragm
Transmission Oil Reservoir
Vacuum Canister with mounting strap
Shifter Solenoid / Control Unit - sold
(2) Dual Oil Pumps, one for flat cam and one for dished
Hydraulic Hoses complete set - sold
(4) Flex Plate to Torque Convert Bolts
Hello, I know it's an old add but I am interested in the line that attaches to the bottom of the ATF tank to the oil pump line. It's approx. 11" long with male fitting on one end and female on the other. I think I see it in your pic's under the other lines. Thanks
Is your intake manifold still for sale?
Thanks
Tom
Quote from: tmea on 03 August 2016, 00:34
Is your intake manifold still for sale?
Thanks
Tom
Hi Tom
You can use a standard manual inlet manifold and get someone to weld or braze a piece of 1/2 inch thin walled pipe onto it and drill a hole thru it... or I actually drilled the hole...first and the pipe sat into the hole neat and then my son welded it into place...
only think He done wrong was He welded it in straight, not at an angle... lol but no one knows anything over here about autosticks..
best of luck tom...
Lee 68autobug Australia
A new member, sent a PM.