Print Page - reverse problem

Title: reverse problem
Post by: olgunc on 05 November 2008, 15:47

hi everybody,
74 a/s shifting reverse but not back to low or neutral when the motor is working,

have any idea? thanks

Title: Re: reverse problem
Post by: johnr on 05 November 2008, 18:17

Maybe a vacuum problem?

Title: Re: reverse problem
Post by: volkenstein on 07 November 2008, 09:46

Olgun,
Is it hard to shift into reverse? You should check your freeplay adjustment - Lee (68Autobug) and Mike (Bookwus) can tell you how better than I can.

Regards
Volkenstein

Title: Re: reverse problem
Post by: olgunc on 11 November 2008, 12:39

thanks volkenstein,
infact ı can shift to reverse but it is impossible to shift from reverse to neutral or low,
regards,

Title: Re: reverse problem
Post by: 68autobug on 15 November 2008, 15:46

Wow,
another hard one...
Does it crunch when going into Reverse???
If so, it sounds like its NOT shifting OUT of reverse
as there is too much pressure from reverse gear
keeping it in gear....

other than that....?? Its a hard one to guess...

LEE

Title: Re: reverse problem
Post by: olgunc on 17 November 2008, 11:56

thanks alot Lee :)
yes it crunches when going into reverse.
but as u mentioned it's not shifting out of reverse. is it a more pressure problem or a leak on canister, lines, etc...?

Title: Re: reverse problem
Post by: olgunc on 17 November 2008, 11:58

today ı recognized that there is a leak on the manifold. May it be the problem?

Title: Re: reverse problem
Post by: 68autobug on 18 November 2008, 09:43

I hope that that IS the problem..
It seems that there is enough vacuum to get into reverse
but not enough to release the clutch thru the clutch servo..

once fixed You may need to adjust the clutch servo..

Lee

Title: Re: reverse problem
Post by: olgunc on 18 November 2008, 10:01

thanks Lee
I hope I can fix the problem this weekend.

Olgun

VW Automatic Register

Technical forum => Technical => Topic started by: olgunc on 05 November 2008, 15:47