Print Page - dual port manifold vacuum port ?

Title: dual port manifold vacuum port ?
Post by: AUTO on 01 December 2008, 18:49

Hi am i correct in thinking i will have to alter my dual port manifold
as there is no fitting to connect the vacuum pipe
I have seen one on my old single port manifold ?
I just thought i would ask before i started drilling it ???
cheers phil

Title: Re: dual port manifold vacuum port ?
Post by: volkenstein on 01 December 2008, 20:54

Phil,
Yes you'll need a large vacuum spigot on the manifold, unless you tap the end castings for vacuum or some such.

HTH
Volkenstein

Title: Re: dual port manifold vacuum port ?
Post by: 68autobug on 03 December 2008, 06:03

I have a single port manifold to drill out too..
something to think about over the summer Christmas season
when its too hot to drive My beetle... 36.3C at the moment..

cheers

Lee
[down under where its summer]

VW Automatic Register

Technical forum => Technical => Topic started by: AUTO on 01 December 2008, 18:49