Repair manual

[Bookwus]

Hiya Barb,

Yes, both parts can be replaced via their closest openings.

However, in order to replace the shift rod bushing the shift rod itself will have to come out of the tunnel.  To remove it you will have to undo the shift coupler (and since you are doing that, it makes good sense to just replace the shift coupler if it's in questionable shape) and then move the shift rod forward in the tunnel. 

The tunnel has an access plate at its forward end (you'll have to get under the car to get at it), remove that and work the shift rod further forward.  Now it will be blocked by the spare tire well.  Remove the spare tire and remove the plates (rear and front of the well) and move the shift rod through that area.

[Barb]

Thank You, I get at that next week.