Print Page - Looking for Metal ATF lines

Title: Looking for Metal ATF lines
Post by: TaoDude on April 14, 2006, 10:09:26 PM

I am trying to find the lines to and from the ATF pump. Anyone got them?

Title: Looking for Metal ATF lines
Post by: bookwus on April 15, 2006, 05:25:53 PM

Hiya Tao,

I may have a set or two out in the shop.

You are referring to the metal lines to the 1. ATF reservoir and to the
2. coupling with the reinforced rubber line to the torque converter, right?

Mike

1970 AS Bug

Title: Looking for Metal ATF lines
Post by: TaoDude on April 15, 2006, 08:18:55 PM

Yep! The one side that goes through the engine tin to the drivers side of the oil pump and the one that goes from the passenger side of the pump over to where it connects to the line from the ATF tank(that is the line that bolts to the muffler clamp for support)

Title: Looking for Metal ATF lines
Post by: bookwus on April 17, 2006, 01:57:32 AM

Hiya Tao,

OK......I ambled out into the shop and found a set of lines. Used but clean and in good shape. These lines are from a 1970 Bug. I believe (but I am not absolutely positive) that they will fit up through a 72. IIRC the oil pump was changed in 73 and that may have affected the lines and fittings.

In any event, zap a p-mail my way and we can get details ironed out and get them to you.

Mike

1970 AS Bug

Title: ATF hoses
Post by: Jeff on April 22, 2006, 03:49:43 PM

You can go to your local hydralic hose supplier and they can make you some brand new ones. Just take the ones you want replaced with you and they will make them in about 15 minutes. Look in your local phone book under hoses, or hydralic hoses.

VWAR Old forum !

Sale & Swap => Sale & Swap => Topic started by: TaoDude on April 14, 2006, 10:09:26 PM