Print Page - ATF line out

Title: ATF line out
Post by: tisseman on December 30, 2003, 05:23:20 PM

I rebuilding my VW Bike and have changed the orginal 4 speed gearbox to Automatic Stick Shift but I cant figure out how the ATF line is on the oilpump, is it out to the converter to the right when looking on the pump in front, or?
I have the Bentley manual.
It is maybe just half the right forum for the question, but I hope you can help me.

Title: ATF line out
Post by: Untitled on December 31, 2003, 04:49:06 AM

When looking at the front of the pump, the inlet is on the right side and the outlet is on the left side.

Title: ATF line out
Post by: bookwus on December 31, 2003, 04:35:26 PM

Hiya Untitled,

I had a little difficulty understanding your description. If "back" is rear and "front" is forward, wouldn't the front of the pump be attached to the engine?

Mike

1970 AS Bug

Title: ATF line out
Post by: tisseman on December 31, 2003, 08:17:02 PM

Tnx for the answer, I hoped it was like this becuse it fits how I can place the ATF can and the ATF line.
If you are intrested some pictures on my web:
http://hem.passagen.se/matisse/Engelska/EMC.HTM

VWAR Old forum !

Technical => Technical => Topic started by: tisseman on December 30, 2003, 05:23:20 PM