Maintenance
& service.
The
following operations must be carried out during the maintenance
services:
- Check
all level in torque converter oil tank and add if necessary.
Check torque converter oil tank and oil hoses for leaks
every 5,000 km.
- Check
drive shafts and seals for leaks and damage, every 10,000
km.
- Clean
rear wheel bearing and pack with grease at 50,000 km,
100,000 km , and so on.
- Rear
axle and gearbox. Change oil, clean magnetic drain plug,
check for leaks every 50,000 km, 100,000 km , and so on.
- Real
axle, check oil level, add if necessary and check for
leaks every 10,000 km.
- Check
shift clutch adjustment every 10,000 km. (a page on-how-to-do-it
will come later)
- Clean
air filter on control valve. Wash in suitable fluid, blow
out and reinstall when dry, every 10,000 km.
- Check
contact in selector lever and clean if necessary every
10,000 km (a page on-how-to-do-it will come later)
|
