WTB control valve in good working condition

[singlecab61]

Hello fellow Auto-Sticker's,

I am looking for a control valve in good working conditon. The control valve in my Auto-Stick is junk to say the least. I have a feeling that all the diaphrams in the CV are hard and probably leak from the car sitting for 10 years . 95% of my current shifting issues have been linked to the shifter and CV. I replaced the shifter contact and reset the adjustment. Shifting and clutch engagement got much better, but still having some issues. (Clutch engagement time). As soon as I touched the clutch adjustment screw on the CV, all went bad. I only adjusted it 1/2 turn in like the Bently manual instructed. Ease of shifting went out the window . I turned the screw back out 1/2 turn to where it was, nothing changed, still fubared shifting and clutch engagement . I am 99% positive the CV is the culprit.

Let me know what you all have! Thank you!

-Evan

[Bookwus]

Hiya Evan,

Did you catch the ad just posted by ajcarguy here in the Parts forum?  Working parts from a car with only 80,000 miles.  Might be worth checking out.

[singlecab61]

I just replied to his thread. Thank you Mike!!

[ntheath]

Are you referring to the valve which sits in the engine compartment up on the right with all the hoses?  I have one as well if you are still in need.  The whole AS was working fine when I disassembled the car so the CV was working as well.  Just let me know.

nick

[weevil]

Hi Nick
second to Evan....
How much do you want for the control valve. I need one for my AS
Many thanks

[daddygo]

Hi Nick:

I'm looking for a torque converter and a flexplate for my 1971 Karmann Ghia.
Let me know either way.

Thanks

Kevin

[68autobug]

It certainly pays to have a spare control valve...

best of luck

LEE