VWAR Old forum !

Hi ,  I  like  to know if  any  of you  have  installed  the following wiring harness, Painless ,wire works , watsons street works . And  if any of the above are easier  to  install .  I'm  a novice!  Thanks  Manny

Hi Manny,
I have sent You an email today about the wiring looms etc..
If You need any help with the AutoStick Wiring  just ask...
regards

Lee --  68AutoBug --  AUSTRALIA --

Thanks Lee ,got Your e-mail I appreciate any  help You can offer!!!
                                                                              Manny

Manny, I've tried to install the painless wiring harness, I have a '71 Super.  I purchased the harness through J.C. Whitney, however, there were no provisions for the autostick electricals (temp switch, P/N switch, or shift solenoid) I had to fabricate these by myself.  Other than that the harness is fine.  The hardest part of the installation was routing the main harness through the body cavity (behind where the L/R fender attatches to the body) VW used an insulating foam aroound the factory-installed harness that took quite awhile to get out, enough so that I coould pass the new harness through.  I used a straightened coat hanger to pull it through.  It worked well.