AUTO STICK OIL PUMP SEALS

[Dave H]

I am in desperate need of a new oil pump or gaskets and 2 seals to rebuild the one I have. Does anyone know where to get them???
Thanks Dave

[volkenstein]

Dave,
        Go here for a discussion..

http://volks.org/vwar/forum/viewtopic.php?t=55&start=0&postdays=0&postorder=asc&highlight=&sid=61d1371b9df82787718852ee75b81165

You'll be hitting the (USA) phone books.

www.evwparts.com also has the correct oil/atf pump gaskets. I bought all three from them not more than 3 months ago.

Enjoy
Volkenstein

[Dave H]

Did you find the seals on EV sight??
Thanks  Dave

[Dave H]

Also do you have the part number for Gaskets?
Thanks  Dave

[Crasher]

Simrit made the originals but they don't list one anymore that can withstand the pressure. I was lucky enough to get a new genuine pump NOS.

[Dave H]

Where did you get new pump??
Thanks  Dave

[Crasher]

From a company in Germany who supply me with genuine parts for the water-cooled VAG business I am part of. I don't think there are any more around, that was six years ago.

[volkenstein]

Dave,
       Unless Lee (68Autobug) chips in first, I still have the boxes the seals came in. I'll also trawl through my papers and crap to see if I can find what Part No those gaskets were.

Interestingly enough....I didn't find them on evwparts...

I bought my seals off Lee, who had ordered 20 at one stage a long time ago. He got 'em via a mate in Canada, who got them from Dichtomatik or TCM in the US. Can't remember which.

Volkenstein

[Dave H]

I think I found a part number of the Gaskets 111-115-131B
I type that number in on a search and they came up but no picture so Im not 100 percent sure those gaskets are right all I need is 2.
I did order 10 seals so if anynoe needs some let me know.

Thanks Dave

[Crasher]

I get the original number of the gaskets to be 113 115 207. VW dropped them as of March 1996.

[volkenstein]

Dave,
       Search www.evwparts.com with Steve's (Crasher or the bug driver formerly known as 1302LS Auto)  part number - no spaces. I did and it came up as Gasket, Autostick Oil Pump for $1.50 US.


Enjoy
Volkenstein

[Crasher]

Joe at evw is turning out to be a great source of SA parts.

[68AutoBug]

Hi Guys,
I'm not sure which are the correct part numbers for the gaskets..
as suppliers over the years sent Me all sorts of gaskets...
I have 111 115 131A which have the correct 6mm bolt holes..[?]
I also have 111 115 111A which may be the other gasket {?}

My Pump have  8mm bolt holes, but the bolts are only 6mm OD..
so when I replaced the gaskets, one fell down as the bolts couldn't hold it up... so I finally used a very small amount of gasket cement to hold the gasket in place...
I now have some of the 6mm hole gaskets...
but the real part numbers.. I was searching everywhere and now am not sure of anything... lol...  

Good to see you have found some more seals Dave H...
where are You located dave? UK or USA??

Lee -- 68AutoBug -- Australia

http://community.webshots.com/user/vw68autobug

[Crasher]

I got the number 113 115 207 of a 1983 copy of the VW microfiche.

[volkenstein]

Guys,
       Here's a cut 'n' paste :

111115111B   Oil Pump Base Gasket    2   $0.65   $1.30         
113115207   Oil Pump Gasket    2   $1.50   $3.00         
111115131B   Oil Pump Cover Gasket    2   $0.50   $1.00   

Lee, looks like these ones are for 8mm pumps (which I have).

I can take a piccie if everyone would like.

Regards
Volkenstein